Go to the server rack and search for the amplifier and the old music player (e.g. MOOD player).

Example:

• Pull out the old music player as shown in the picture

• Unplug three cables from the device (network cable, audio cable which is connected to the amplifier, power cable)

At that point: only remove the power cable entirely from the server cabinet.

If your set-up has a BOSE or Cloud amplifier (or similar), we recommend using the audio cable provided by us.

• Connect the HearDis! music player directly with one of the RCA input plugs (exchange the existing cable)

• Choose one input channel (e.g. AUX, Input A, Line A, etc.) on the back of the amplifier

  • • red plug (right channel) in red or R

    • white plug (left channel) in white or L

• Switch to the corresponding input channel on the front of the amplifier (input, music source) to e.g. AUX, Input A, Line A, etc.

• Remove the old audio cable

If your set-up has one of the following amplifiers or similar ones
without a visible RCA input, we recommend keeping and using the existing audio cable.

• If it's not possible to connect the HearDis! audio cable directly, please use the supplied RSA adapter to connect our audio cable with the cable from your amplifier.

• We recommend securing the connection with additional tape in this case

Follow the initial installation guide for all subsequent steps.